- Products
- Panasonic air conditioner split concealed duct unit D3 CS-E18RD3EAW 5.1KW
Panasonic air conditioner split concealed duct unit D3 CS-E18RD3EAW 5.1KW
Description
These extremely flat duct units have been specially designed for apartments, offices, shops and restaurants!
The devices can be placed invisibly into false ceilings to provide a high level of comfort and reliable energy efficiency. Special interfaces from Panasonic allow the duct units to be ...
?xml>These extremely flat duct units have been specially designed for apartments, offices, shops and restaurants!
The devices can be placed invisibly into false ceilings to provide a high level of comfort and reliable energy efficiency. Special interfaces from Panasonic allow the duct units to be integrated into building control systems via KNX, Modbus and EnOcean. The Internet control interface can be used to control the duct units via smartphone, tablet or PC.
Features
- Heating and cooling operation down to -10 °C
- Energy savings of up to 20% when using “savings mode”
- Compact interior devices without any loss of static pressure (installation height just 200 / 235 mm)
- Weekly timer with 42 switching processes per week
- Condensate pump included (max. delivery ...
- Heating and cooling operation down to -10 °C
- Energy savings of up to 20% when using “savings mode”
- Compact interior devices without any loss of static pressure (installation height just 200 / 235 mm)
- Weekly timer with 42 switching processes per week
- Condensate pump included (max. delivery head: 200 mm)
- Devices can be used with existing R22 refrigerant lines
- External control possible via Internet, KNX, EnOcean and Modbus
Accessories / Replacement parts
-
Control via internet
Technical data
(Niedrig/Mittel/Hoch)
(Niedrig/Mittel/Hoch)
Notes
1) The annual power consumption is based on the standards ErP Directive.
2) The preconfigured external static pressure at the maximum air volume is 25 Pa. This setting can be increased using the DIP switch on the control board of the indoor unit.
3) Measurement locations: Indoor unit: 1.5 m beneath the device with 1 m duct on the intake side and 2 m duct on the pressure side; Outdoor unit: 1 m in front of the device at a height of 1.5 m. The measured values are based on EUROVENT document 6/C/006-97.
4) 70 mm need to be added for pipe connections.
5) Energy efficiency scale from A+++ to D.