Cooling controller

Dixell cooling/humidity controller XH260L-500C0 230V

Order No.: 295.3418
Manufacturer number: XH260L-500C0
Manufacturer: Dixell

More in this category: Cooling controller

Loading

One click to the most important information:

Description

The XH260L front panel device 185 x 38 mm and the XH260V front panel device 64 x 100 mm are micro-processor controlled regulators for cooling applications in the normal and low temperature ranges.
The devices can control an entire cooling location including regulation of neutral zone ...

The XH260L front panel device 185 x 38 mm and the XH260V front panel device 64 x 100 mm are micro-processor controlled regulators for cooling applications in the normal and low temperature ranges.
The devices can control an entire cooling location including regulation of neutral zone humidity.

The devices feature 6 relays:

  • Compressor
  • Defrosting
  • Fan
  • An additional separator heating contact
  • A “humidify” contact
  • A “dehumidify” contact

There are also two NTC inputs. One for temperature regulation and an evaporator sensor for defrosting management.
For neutral zone humidity control there is a 4 ÷ 20 mA input (XH20P humidity sensor) as well as an isolated digital input that can be configured via the parameters.
A HOT KEY connection for external HOT KEY parameter storage card is also available. Instead of a HOT KEY, the XJ485CX+CAB/RS1 cable be connected. This allows the regulator to be integrated into the XWEB 500 logging and remote maintenance system.

show more


Accessories / Replacement parts

  • Interface adapter
    Dixell interface adapter XJ485CX+CAB/RS
    Order No.: 291.3435
  • Moisture sensor
    Dixell humidity sensor wall mounting XH20P-00000 9-20V/DC
    Order No.: 298.3403
  • NTC pipe contact sensor
    Dixell pipe contact sensor NTC NT6 1.5m
    Order No.: 298.3401
  • Dixell pipe contact sensor NTC NP4-67 1.5m
    Order No.: 298.3439
  • Dixell pipe contact sensor NTC NT6-67 1.5m
    Order No.: 298.1806
  • NTC temperature sensor
    Dixell temperature sensor NTC NS6S 3,0m (silicone blue) 6x40mm V2A
    Order No.: 298.1724
  • Dixell temperature sensor NTC NG6 1,5m (black) 6x15mm plastic
    Order No.: 298.1715
  • Dixell temperature sensor NTC NG6 3,0m (black) 6x15mm plastic
    Order No.: 298.1718
  • Dixell temperature sensor NTC NG6 6,0m (black) 6x15mm plastic
    Order No.: 298.3426
  • Dixell temperature sensor NTC NS6 1,5m (light grey) 6x40mm V2A
    Order No.: 298.1719
  • Dixell temperature sensor NTC NS6 3,0m (light grey) 6x40mm V2A
    Order No.: 298.1716
  • Dixell temperature sensor NTC NS6S 1,5m (silicone blue) 6x40mm V2A
    Order No.: 298.1717
  • PTC temperature sensor
    Dixell temperature sensor PTC S6 1,5m (black) 6x30mm V2A
    Order No.: 298.1701
  • Dixell temperature sensor PTC S6 3,0m (black) 6x30mm V2A
    Order No.: 298.1702
  • Dixell temperature sensor PTC S6.S 1,5m (silicone grey) 6x40mm V2A
    Order No.: 298.1704
  • Dixell temperature sensor PTC S6.S 3,0m (silicone grey) 6x40mm V2A
    Order No.: 298.1705
  • Dixell temperature sensor PTC S6.R 5,0m (black) 6x40mm V2A
    Order No.: 298.1762
  • Programming key
    Dixell programming key Hot Key
    Order No.: 291.3406
  • Rubber seal
    Dixell rubber seal for 74 x 32 mm | Compatible with all devices
    Order No.: 298.1722

Technical data

Dimensions
Width
185 mm
Height
38 mm
Depth
76 mm
General information
Display fields
± 3 mit D.p.
Resolution
0,1 °C
Type
XH260L-500C0
Electrical Data
Input
NTC + 4 bis 20mA
Relay outputs
compressor:
20 (3) A, 250 Vac
 
heater:
8 (3) A, 250 Vac
 
defrost:
8 (3) A, 250 Vac
 
ventilator:
8 (3) A, 250 Vac
 
humidification:
8 (3) A, 250 Vac
 
dehumidification:
8 (3) A, 250 Vac
Protection class
IP20
front protection class: IP65 when using rubber seals
Supply voltage
230/1/50 V/Ph/Hz
Temperature data
Storage temperature
-30 bis +85 °C
Temperature range
NTC sensor
-50 bis 110 °C
Temperature measuring range
max.
60 °C
min.
0 °C

Detaillierte technische Daten finden Sie in der Bedienungsanleitung in der Rubrik Downloads!

Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.

Customers also bought...

Loading

Login now for complete access

To login
Article in stock