Composite controller/power regulator

Dixell Verbundregler mit Display XC660D-7C21F-3.5 90-260V

Order No.: 297.3442
Manufacturer number: XC660D-7C21F-3.5
Manufacturer: Lumity

To previous product 297.3439

More in this category: Composite controller/power regulator

One click to the most important information:

Description

The XC600D family of controllers is designed for the simple implementation of simultaneous control of compressors and fans as well as of both normal and complex rack systems.
Staged, screw, Scroll™ or Stream™ compressors can be used.
It is also possible to control two suction circuits ...

The XC600D family of controllers is designed for the simple implementation of simultaneous control of compressors and fans as well as of both normal and complex rack systems.
Staged, screw, Scroll™ or Stream™ compressors can be used.
It is also possible to control two suction circuits with a common condenser.

The control logic with neutral zone depends on the temperature or pressure in the suction line for the compressor and in the hot gas line for the fans.
Using an optimised rotation algorithm, the operating time for different loads can be evenly spread to ensure even wear.
Each regulator load has its own isolated protective contact that immediately shuts off the load output when activated.
Optimum safety for the entire system is also provided by the direct 230 V AC contacts for the high and low pressure switches that shut off the entire rack system immediately in an emergency.

The display shows all system information: temperature and pressure values, operating and maintenance status for loads and active alarms.
Depending on the type of refrigerant, the controller can also calculate the temperatures in the suction and hot gas lines from their measured pressures.

The HOT KEY memory card allows all parameter settings to be easily saved, downloaded and transferred between devices.
The device features an RS485 communication interface using the standard Modbus protocol. This allows a connection to a building utilities or monitoring system (e.g. Dixell Xweb500) to be easily set up.

show more


Technical data

Dimensions
Width
70 mm
Height
135 mm
Depth
60 mm
General information
Resolution
0,1 °C
0.1 bar
Type
Verbundregler/Leistungsregler
Housing
selbstverlöschender Kunststoff
Communication protocol
ModBus-RTU
Mounting type
auf DIN-Hutschiene
Interface
RS485
Safety class software
A
Storage space
EEPROM
for refrigerants
R22
 
R32
 
R134A
 
R290
 
R404A
 
R407A
 
R407C
 
R407F
 
R410
 
R448A
 
R449A
 
R450A
 
R452A
 
R507
 
R513
 
R1234ze
 
R744
 
R515B
 
R454A
 
R454B
 
R454C
 
R455A
 
R1234YF
Connections
Connection
abnehmbare Schraubklemmen
mit Kabelquerschnitt ≤ 2.5 mm²
Electrical Data
Output analog
4 ÷ 6x relay
SPST 5(3)A; 250 Vac
 
Analogue output:
2 x 4÷20 mA or 0÷10 V
Input
Analog
3x NTC
4 to 20 mA; 0.5 to 4.5 Vdc
 
1x NTC
Digital
8x potential free
2x 230 Vac voltage
Power consumption
6 VA
Relay outputs
6 relays SPST;
rating data in accordance with UL60730
 
resistive 3A;
240 VAC, 50K cycles
 
inductive (G.P)
3A; 240 VAC, 30K cycles
 
motor power
240 VAC; 1/8 hp (1.9FLA/11.4LRA), 30K cycles
 
pilot duty 180 VA;
240 VAC, 30K cycles
Protection class
IP20
Supply voltage
230/1/50 V/Ph/Hz
Humidity
Ambient humidity
20 bis 85 %
without condensation
Temperature data
Storage temperature
-25 bis 80 °C
Temperature range
NTC sensor
-40 bis 110 °C
Temperature measuring range
max.
60 °C
min.
-10 °C
Temperaturmessung
Genauigkeit
±0,7 °C
at 25°C; ± 1 digit
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.

Customers also bought...

Loading

Login now for complete access

To login
Article in stock