Without logging

Pego control box electronic 230V ECP 230CX / XR70CX with 2 NTC sensors

Order No.: 272.2413
Manufacturer number: SP1D-230CX
Manufacturer: Pego

More in this category: Without logging

One click to the most important information:

Description

ECP 230 CX is a microprocessor controlled cooling system controller for regulating room temperature and evaporator fan. The actual temperature is shown on a three-digital LED display. The cooling system controller features four independent relay outputs, one each for the compressor, evaporator ...

ECP 230 CX is a microprocessor controlled cooling system controller for regulating room temperature and evaporator fan. The actual temperature is shown on a three-digital LED display. The cooling system controller features four independent relay outputs, one each for the compressor, evaporator fan, alarm output and defrosting heater. The ECP 230CX cooling system controller additionally features an individually configurable isolated input contact. The state of each output is shown on the display. The cooling system controller is programmed using the buttons on the front panel. The ECP 230CX controller further features two sensor inputs (either NTC or PTC) for reading the room and evaporator temperatures. Sensor breaks and short circuits are shown on the display. Defrosting processes are cyclical. The version conforms with general guidelines and standards such as CE, EN 61000-6-1, EN 61000-6-3, EN 60335-1.

Cold storage area controller functions

  • Normal operation (via thermostat): Connect low pressure switch on terminals 17 and 18

  • Pump down operation: Attach low pressure (pump down) switch to terminals 18 and 19

Note: To ensure proper functioning, the pressure switch must always be connected. If you have just one safety pressure switch (Duo Pressostat), bridge terminals 18 and 20

  • External immediate stop: The external immediate stop switches the system off on the controller side (this is not an emergency off function). Cold storage area lighting and alarm remain active. This function is pre-wired in the factory

show more


Accessories / Replacement parts

  • Sensor
    Dixell temperature sensor NTC NG6 1,5m (black) 6x15mm plastic
    Order No.: 298.1715
  • Dixell temperature sensor NTC NG6 3,0m (black) 6x15mm plastic
    Order No.: 298.1718

Technical data

Dimensions
Width
290 mm
Height
340 mm
Depth
145 mm
General information
Features
1 Stk. Kühlstellenregler Dixell XR70CX
 
2 Stk. NTC Fühler 10K 1% 1,5m Silikon
 
Diverse Verschraubungen zur Zugentlastung und Leitungseinführung
Housing
ABS Kunststoff
Electrical Data
Measurement input
2 x NTC oder PTC Fühler
Protection class
IP55
Supply voltage
230/1/50 V/Ph/Hz
max. power consumption
Condenser fan (AC3)
Ansteuerung parallel mit dem Verdichter
Defrost heating
max.: 30 A (res.)
Alarm relay
max.: 8 A (res.)
Evaporator fan (AC3)
max.: 1,5 kW/6 A (ind.)
Condensing unit (AC3)
max.: 2,4 kW/14A (ind.)
Humidity
Humidity measurement range
20 bis 85 %rh
Weight
Weight net
ca. 5,1 kg
Temperature data
Storage temperature
-25 bis +60 °C
Umgebungstemperatur
max.
60 °C
min.
0 °C
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.

Customers also bought...

Loading

Login now for complete access

To login
Article in stock