Ceiling-mounted evaporators double-sided

ECO air cooler ceiling DFE 33 EL-7 ED with heating

Order No.: 164.1671
Manufacturer number: DFE33EL7ED
Manufacturer: Modine / ECO

To previous product 164.1372

Loading

One click to the most important information:

Description

The double blower DFE series is used in low profile refrigeration cells for storing fresh and frozen products.
The motor fans used in these models have two speed settings, allowing the same device to be used for normal or reduced ventilation (low noise).
The high-performance heat exchangers ...

The double blower DFE series is used in low profile refrigeration cells for storing fresh and frozen products.
The motor fans used in these models have two speed settings, allowing the same device to be used for normal or reduced ventilation (low noise).
The high-performance heat exchangers found in all models in this series are made using special profile aluminium fins and are produced for use with copper pipes suitable for modern refrigerants.

Different variants depending on cell temperature:

  • DFE H3 for high temperatures (= +2 °C) with fin spacing of 3.5 mm;
  • DFE L7 for low temperatures (= -25 °C) with fin spacing of 7 mm, ED electrical defrosting recommended.

The standard motor fans have two different speed settings and the following properties:

  • Diameter 315 mm, alternating current 230 V/1/50-60 Hz with external rotor and integrated operating capacitor and protective grille made from polyamide glass fibres.
  • Protection class IP 44;
  • Insulation class F;
  • Inner temperature monitor;
  • Operating temperature -35 °C to +40 °C.

Versions with standard ED defrosting are equipped with stainless steel heating elements and vulcanised end terminators and intended for use with a 400 V/3/50-60 Hz connection.
The electrical parts and the housing are connected to an earth terminal; motor and heating element connections are in separate junction boxes with an IP 54 protection rating.

Models with different heat exchangers, defrosting mechanisms and motor fans can be provided on request.
Use the “Scelte“ program from Modine to select models that function in conditions other than standard conditions stated in the catalogue.
Please get in touch with our technical advisors if you have special application requirements or need further information.

show more


Accessories / Replacement parts

  • Defrost heating block
    ECO tubular heating element block and tray 1760mm 1500W f.DFE33MN 197603
    Order No.: 164.2753
  • Grille
    ECO ventilator protective grille 370mm/35mm f.DFE/SC/SL 176901
    Order No.: 164.2918
  • Outlet screw connection
    ECO drain fitting 277702 + 190301 R 1'' f.CTE/DFE/LFE/STE/MTE/MIC
    Order No.: 164.2952

Technical data

General information
Fin spacing
7,0 mm
Type
DFE33EL7 ED
Connections
Defrost water drain
1" Inch
Electric defrosting
Block
DFE (low performance)
2x 1500 W
Total
DFE
4500 W
Tray
DFE
1x 1500 W
Electrical Data
Supply voltage
Fan
230-1-50 V/Ph/Hz
Surfaces
Surface
22,8 m²
Weight
Weight net
50 kg
Performance data
Nominal capacity
6.42 W
refrigerant=R 404A, motor speed=high rpm-1, temperature difference=8 °K, evaporating temperature=-8 °C
 
5.48 W
refrigerant=R 404A, motor speed=low rpm-1, temperature difference=8 °K, evaporating temperature=-8 °C
Pipe connections
Outlet
Diameter (solder)
28 mm
Inlet
Flare
SAE 1/2"* Inch
Fan data
Rotational speed
high
1300 rpm-1
low
1000 rpm-1
Number of fans
3x 315 pcs
Fan power
high
330
W total
 
1.5
A total
low
285
W total
 
1.29
A total
Throw distance
at high speed
2x 10 m
at low speed
2x 8 m
Volume
Pipe volume
8,6 dm³
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.
Loading

Login now for complete access

To login