three pipe system
Panasonic air conditioner outdoor unit VRF 3-wire ECOi 6N U-12MF2E8 33.5KW
Icon. Image similar to product.
Description
ECOi MF2 6N series models with heat recovery are mong the most advanced VRF systems on the market. They offer high performance and energy efficiency with simultaneous heating and cooling as well as easier installation and maintenance thanks to their special design.
Features
- Top COP of 4.77 (average value for cooling and heating with a 22.4 kW outdoor device)
- Simultaneous cooling and heating operation for up to 52 indoor devices
- Takes up the least amount of space of any device available
- Sequential switching and emergency operation
- Single outdoor design housing with ...
- Top COP of 4.77 (average value for cooling and heating with a 22.4 kW outdoor device)
- Simultaneous cooling and heating operation for up to 52 indoor devices
- Takes up the least amount of space of any device available
- Sequential switching and emergency operation
- Single outdoor design housing with compact design
- Improved energy efficiency
- Scroll compressor with fixed speed provides high performance and high internal pressures
- Improved heat exchanger
- Structural changges to various components
- Can be installed directly next to one another to save space
Important information about the technical data:
- SEER/SCOP values are calculated according to the specifications in the EU Regulation 2016/2281 and based on the seasonal room cooling/heating energy efficiency (η) with the following formula: SEER, SCOP = (η + correction factor) × primary energy factor.
- Recommend fuse protection and electrical cable cross-sections based on 25 m and laying system B2. These values must be checked at the installation location by an electrician and adjusted as necessary to comply with the legal regulations.
- Measurement locations for sounds levels: 1 m in front of the device at a height of 1.5 m. The measured values are based on EUROVENT document 6/C/006-97.
- When combining several outdoor units, additional refrigerant distribution sets are required. These must be ordered separately.
- For the first value, the height difference for outdoor devices is the upper number, it is the lower number for the second value
- The value given for external static pressure is the maximum possible value.
Technical data
Dimensions
Width
1.000 mm
Height
1.758 mm
Depth
930 mm
max. line length
1.000 m
General information
Connectable indoor units
22
Kältemitteleinsatzbereich
R410A
Amount of refrigerant
2,64 kg
max. height difference
indoor unit/outdoor unit
50 / 40 m
Pressure
External static pressure (low
high)
- / 80 Pa
Electrical Data
Recommended overcurrent relay
3 x 35 A
Nominal operating current (Cooling/Heating)
14,50 / 14,10 A
Supply voltage
400/3/50 V/Ph/Hz
empfohlener Netzkabelquerschnitt
5 x 6 mm²
max. starting current
77 A
max. power consumption
21,2 A
Weight
Weight net
314 kg
Performance data
Nominal heating capacity (min. - max.)
37,5 kW
Nominal cooling capacity (min. - max.)
33,50 kW
33.5
Nominal power consumption
Heating (min. - max.)
8,72 kW
Cooling (min. - max.)
9,05 kW
SCOP
3,87
SEER
5,32
Pipe connections
Liquid line
12,70 mm
1/2 inch
Hot gas line
19,05 mm
Suction gas line
25,40 mm
1 Zoll
Oil equalization line
6,35 mm
Sound data
Schalldruckpegel
Heizen
(Flüster/Niedrig/Hoch)
(Flüster/Niedrig/Hoch)
61 dB(A)
Schallleistung
Heizen
(Flüster/Niedrig/Hoch)
(Flüster/Niedrig/Hoch)
72,5 / - / 75,5 dB(A)
Sound power
Cooling (whisper/low/high)
72,5 / - / 75,5 dB(A)
Temperature data
Air temperature
Heating
-20 bis +18 °C
Cooling
-10 bis +46 °C
Cooling/Heating
-10 bis +24 °C
Fan data
Air volume
Cooling/Heating (whisper/low/high)
12.720 / 12.720 m³/h
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.
Loading