Panasonic air conditioner PACi EU4W cassette without BI PY S-50PY2E5B 5.0kW (583x583mm)
More in this category: Cassette units
One click to the most important information:
Description
Its low weight and minimal height also make these devices suitable for installation into flat false ceilings.
The grid cassette is specially designed for installation into suspended ceilings with a grid size of 600 x 600 mm.
When used with PACi Standard outdoor units, the grid cassettes can be ...
Its low weight and minimal height also make these devices suitable for installation into flat false ceilings.
The grid cassette is specially designed for installation into suspended ceilings with a grid size of 600 x 600 mm.
When used with PACi Standard outdoor units, the grid cassettes can be used in dual, trio and quattro systems. Models with 3.6 kW, 4.5 kW and 5.0 kW are available for this application.
The item does not contain a ceiling panel
Features
- Pre-cut opening for fresh air connection
- High level of comfort from four-way air guide
- Integrated condensate siphon pump with delivery head of 850 mm
- 3 speed turbo fan
- DC fan motor for improved efficiency
- Simple connection to an external ventilation unit or enthalpy heat exchanger (ERV) via PAW-FDC ...
- Pre-cut opening for fresh air connection
- High level of comfort from four-way air guide
- Integrated condensate siphon pump with delivery head of 850 mm
- 3 speed turbo fan
- DC fan motor for improved efficiency
- Simple connection to an external ventilation unit or enthalpy heat exchanger (ERV) via PAW-FDC plug connection on the control board of the indoor unit.
- The outdoor unit can be turned on an off using the remote control for the Panasonic indoor unit.
Accessories / Replacement parts
-
Ceiling panel
-
Design cable remote control
-
Hotel remote control
-
Infrared remote control
-
Redundancy circuit
-
WLAN interface
Technical data
(Niedrig/Mittel/Hoch)
(Niedrig/Mittel/Hoch)
(Niedrig/Mittel/Hoch)
(Niedrig/Mittel/Hoch)
(Niedrig/Mittel/Hoch)
(Niedrig/Mittel/Hoch)
Notes
1) EER/COP values calculated according to EN14511.
2) SEER/SCOP values are calculated according to EU Regulation 626/2011 for models with a rated power up to 12 kW and EU Regulation 2281/2016 for models with a rated power above 12 kW.
3) The annual power consumption is based on the standards in EU Regulation 626/2011.
4) Measurement positions - indoor unit 1.5 m below the ceiling, centrally beneath the unit. The measured values are based on EUROVENT document 6/C/006-97.
5) Outdoor device placed higher than indoor device. *A fuse of 3 A is recommended for the indoor unit.