Electronic

Danfoss electronic expansions valve ETS 6-18 034G5026

Order No.: 231.0795
Manufacturer number: 034G5026
Manufacturer: Danfoss

More in this category: Electronic

One click to the most important information:

Description

The current product range is compact, lightweight and available in a range of different performance classes. Compatible with all common refrigerants (e.g. R410A, R407C, R404A, R507, R134a). Biflow operation possible in reversible systems such as heat pumps. The valve uses single-pole drives. ...

The current product range is compact, lightweight and available in a range of different performance classes. Compatible with all common refrigerants (e.g. R410A, R407C, R404A, R507, R134a). Biflow operation possible in reversible systems such as heat pumps. The valve uses single-pole drives. Various control solutions are available for these single-pole drives. The ETS 6 is designed for HFC/CFC conditioning (including R410A) and generates an operating pressure of 47 bar. The EIM 336, EKD 316 and MCX regulators from Danfoss are optimally designed for controlling the ETS 6. An AST-g service drive is available for manual operation and maintenance of ETS valves.

show more


Features

  • Highly precise flow volume control
  • Proven expertise and excellent reliability

  • Energy-saving design for excellent energy efficiency

  • Compact & lightweight hermetically closed design with replaceable coil

  • Biflow operation for reversible systems

  • Modulation: Directly controlled permanent magnet stepper ...

  • Highly precise flow volume control
  • Proven expertise and excellent reliability

  • Energy-saving design for excellent energy efficiency

  • Compact & lightweight hermetically closed design with replaceable coil

  • Biflow operation for reversible systems

  • Modulation: Directly controlled permanent magnet stepper motor

  • Electrical connection: JST XHP-6 and JST XHP-5

  • Exciter response: min. 30 pps (pulses per second) up to max. 90 pps (recommended value: 31.3 pps)

  • Operating range: 0 to 480 pulses, no holding current required (NOTE: do not apply more than 520 pulses)

  • Installation position: With the solenoid at the top and the valve solenoid assembly tilted by a maximum of ±15˚

  • Solenoid valve for fluid line: When using a solenoid valve for the fluid line, it must be installed such that no hammering is caused in the ETS 6 valve

show more


Accessories / Replacement parts

  • Connection cable
    Danfoss plug 3+E (female) with cable f. AKS cable 5m 060G1034
    Order No.: 231.0471
  • Connection plug
    Danfoss plug without cable f. AKS 060G0008
    Order No.: 231.0877
  • Display unit
    Danfoss display with buttons EKA 164A 084B8563
    Order No.: 231.0801
  • Solenoid valve coil
    Danfoss solenoid valve coil f. ETS 6 12V 1,5m cable 034G5145
    Order No.: 231.040004
  • Danfoss solenoid valve coil f. ETS 6 12V 3,0m cable 034G5135
    Order No.: 231.040005
  • Danfoss solenoid valve coil f. ETS 6 12V 0,7m cable 034G5115
    Order No.: 231.0798
  • Superheating regulator
    Danfoss superheating regulators EKE 1A 24V 080G5300
    Order No.: 231.040344
  • Danfoss superheating regulators EKD 316 24V 084B8040
    Order No.: 231.0799
  • Transformer
    Alco transformer ECT-323 230V/24V AC 25VA 804424
    Order No.: 298.0278

Technical data

Dimensions
Nozzle length
0,8 mm
General information
Flow direction
Biflow
Pressure
Control range
10 bis 100 bar
max. operating pressure
48 bar
Electrical Data
permissible voltage deviation
-15 bis +10 %
Humidity
Ambient humidity
95 %
Performance data
Nominal capacity
8,1 kW bei R134a t0 = +5°C
 
7,3 kW bei R404A t0 = +5°C
 
11,2 kW bei R449A t0 = +5°C
 
10,6 kW bei R407C t0 = +5°C
 
12,1 kW bei R410A t0 = +5°C
Nominal power range
84 bis 533 W
Pipe connections
Outlet
Solder
6,35
1/4"
Inlet
Solder
6,35
1/4"
Temperature data
Liquid temperature
-30 bis +70 °C
Ambient temperature
-40 bis +50 °C
Evaporating temperature
-40 bis +60 °C
max. coil winding temperature
115
Time
Period duration
6 s
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.

Customers also bought...

Loading

Login now for complete access

To login
Available in another country - please contact your local office