Armaflex pipe support Ultima UDP13(9)-28/30

Pipe supports for prevent condensation at attachment points in refrigeration and air conditioning systems. Single-piece, thermally decoupled, with 2 PET segments and self-adhesive closure. All dimensions are designed for Armaflex hoses/plates.
Material type: PET overlapping segments, embedded and bonded in Armaflex Ultima hose or plate products. Outer overlap lining made from coated aluminium sheets, 0.8 mm thick, which also function as the vapour block for the PET overlapping segments.
Colour: Blue
Special note on the material: The protective paper on the adhesive layer can contain traces of silicon.
Note: When using with varying temperature systems, thermal expansion may cause movements in the insulation system that must be absorbed by the entirety of the insulating structure.

• Prevent heat bridges

• Single-piece pipe support with self-adhesive closure

• The only complete system solution with B-s1,d0

  
  

• Thermal conductivity: Same as Armaflex Ultima (declared according to EN ISO 13787 and tested according to EN 12667 / EN ISO 8497
• Water vapour diffusion resistance: Same as Armaflex Ultima (tested according to EN 12086 and EN 13469)
• Material class:
• Euroclass E
• Used in connection Armaflex Ultima hoses BL-s1,d0
• Used in connection with Armaflex Ultima plates B-s2,d0
• (Classification according to EN 13501-1 and tested according to EN 13823 and EN ISO 11925-2
• Practical fire behaviour: Self-extinguishing, does not drip, does not conduct fire
• Reduction of structure-borne noise transfer: Depending on the insulation used in the bracket / pipe holder (according to DIN 4109)
• Storage and shelf-life: Products with a self-adhesive closure must be used within 3 years.
• Can be stored in clean, dry rooms at normal humidity (50-70%) and normal room temperature (0-35 °C).