Reciprocating piston

Tecumseh Außeneinheit SILENSYS Advanced SIL AJ2464P-TX 400V

Order No.: 106.4415
Manufacturer number: SK40630202
Manufacturer: Tecumseh / L'Unite

To previous product 106.3523

More in this category: Reciprocating piston

One click to the most important information:

Description

Condensing units are often mounted on the external walls of buildings, in courtyards, on building facades or roofs. Fully pre-assembled and wired to save time and costs during installation. The experience of Tecumseh Europe in this field means that these aspects were taken into account very ...

Condensing units are often mounted on the external walls of buildings, in courtyards, on building facades or roofs. Fully pre-assembled and wired to save time and costs during installation. The experience of Tecumseh Europe in this field means that these aspects were taken into account very early on to develop a unique condensing unit.

show more


Features

New fan blade geometry
• Improved air circulation within the Silensys® through the use of a special foam sealant above the condenser
• Sound transmission has been reduced using a new, thicker side door
• Any pressure pulses are minimised through the use of a noise damper on the ...

New fan blade geometry
• Improved air circulation within the Silensys® through the use of a special foam sealant above the condenser
• Sound transmission has been reduced using a new, thicker side door
• Any pressure pulses are minimised through the use of a noise damper on the high pressure side
• Vibrations in pipes have been lowered using a special design
• An improved ventilation unit using a motor with constantly active operating capacitor (AC) in the S models
• Change to the fan efficiency regulations – ErP2013/2015: Fan with permanent magnet (EC) for models M, L and XL
• Fastening base for floor and wall mounting (models S and M)
• Door locking mechanism at 90°
• Increased electrical safety:
- Thermomagnetic power contactor
- Internal motor protection switch for compressor and fan motors
- Additional relay on the fan motor (EC)

show more


Accessories / Replacement parts

  • Condenser
    L'Unite condenser CDS 3N SILENSYS V2/3 (S,M,L) 8338277
    Order No.: 106.2663
  • Crankcase heater
    L'unite oil sump heater 230V FCH-40 55W for SILENSYS 8583027
    Order No.: 106.2918
  • Junction box set
    L'Unite junction box kit Junior 8627015
    Order No.: 106.3707
  • Liquid collector
    L'Unite liquid collector without burst protection RSV 1,50L without shut-off valves 8380182
    Order No.: 106.1749
  • Operating capacitor
    L'Unite operating capacitor Silensys 1,5mF 450V 8640124
    Order No.: 106.1779
  • Rotalock valve
    Copeland rotalock valve press.gau.conn.right/byp.conn.left 1'' x 5/8'' + 16mm solder 8683059
    Order No.: 106.1923
  • Seal, intake side
    L'Unite teflon sealing ring 1" 8.361.007
    Order No.: 106.1946
  • Speed regulator
    L'Unite speed controller R404A SILENSYS S AC motor 8580091
    Order No.: 106.3744
  • Ventilator unit
    L'Unite fan unit SILENSYS MTV 65W 230V R09R-36LPS6M4249 8668114
    Order No.: 106.3747
  • Vibration damper
    L'Unite vibration damper f. AJ / CAJ / TAJ 8682050
    Order No.: 106.3739

Technical data

Dimensions
Art der Aufstellung
Außenaufstellung
Width
953 mm
Height
710 mm
Depth
624 mm
General information
Type
vollhermetisch
Expansion
V
see explanation 1
Refrigerant
R404A/R507A
 
R452A
 
R454C
 
R455A
Motor version
TRI
Type
SIL AJ2464P-TX
Condensation type
luftgekühlt
Electrical Data
Start-up current
16,2 A
nominal current
2,0 A
Supply voltage
400/3/50 V/Ph/Hz
max. operating current
3,7 A
Weight
Weight net
70,00 kg
Performance data
Frequency controlled
Nein
Pipe connections
Liquid line
6,00 mm
1/4
siehe Erläuterung 2
Suction line
12,00 mm
1/2
siehe Erläuterung 2
Collector data
Collector volume
1,50 l
Sound data
Sound power level
59,0 dB(A)
Fan data
Diameter
300,00 mm
Power
41,0 W
Number of fans
1 pcs

Erläuterung

  1. Expansion: C = Kapillarrohr; V = Expansionsventil
  2. Metrische Werte sind gerundet
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.
Loading

Login now for complete access

To login
Available in another country - please contact your local office