Without logging
Pego control box electronic 230V ECP 200 Expert with 2 NTC sensors
Icon. Image similar to product.
Description
ECP 200 Expert is a microprocessor controlled cooling system controller for regulating room temperature, evaporator fan and defrosting heater. The actual temperature is shown on a three-digital LED display. The cooling system controller features five independent relay outputs for the ...
ECP 200 Expert is a microprocessor controlled cooling system controller for regulating room temperature, evaporator fan and defrosting heater. The actual temperature is shown on a three-digital LED display. The cooling system controller features five independent relay outputs for the compressor, evaporator fan, defrosting heater, alarm and room lighting. The ECP 200 Expert cooling system controller also features two isolated input contacts (door contact switch and compressor protection) that can be configured. The state of each output is shown on the display. The cooling system controller is programmed using the buttons on the front panel. The ECP 200 Expert controller further features two NTC sensor inputs for reading the room and evaporator temperatures. Sensor breaks and short circuits are shown on the display. The ECP 200 Expert conforms with general guidelines and standards such as CE, EN 61000-6-1, EN 61000-6-3, EN 60335-1.<br> In pump down mode, the LP pressure switch is connected to the digital input (terminal INP-1 and INP-GND). The solenoid is connected to the AUX / Alarm relay. Parameter AU is set to 4.
Accessories / Replacement parts
-
Circuit board
-
Sensor
Technical data
Dimensions
Width
262 mm
ul
Height
168 mm
ul
Depth
97 mm
ul
General information
Description
Kühlanlagensteuerung ECP 200 Expert 230V
Type
ECP 200 Expert
ul
Electrical Data
Protection class
IP 65
ul
Weight
Weight net
ca. 1,8 kg
ul
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.
Loading
