- Products
- Evaporators & condensers
- Evaporators
- Evaporators
- Processing room evaporators
- Kelvion air cooler ceiling KDC-352-2BE with heating
Kelvion air cooler ceiling KDC-352-2BE with heating
More in this category: Processing room evaporators
One click to the most important information:
Description
The KDC ceiling air cooler creates a pleasant environment for people due the low speed of the air and quiet operation. It has outlet blowers on both sides and is suitable for use in normal cooling as well as low temperature commercial cooling applications. A wide range of application areas, ...
?xml>The KDC ceiling air cooler creates a pleasant environment for people due the low speed of the air and quiet operation. It has outlet blowers on both sides and is suitable for use in normal cooling as well as low temperature commercial cooling applications. A wide range of application areas, simple installation, easy to maintain and high quality are the features that make this unit the perfect solution for cooling your workspaces.
- Smooth surfaces: Easy to clean
- Optional 45/50 bar CO2/R744 version
- Optional CAL distributor available
- Fans can be operated at a high or low speed
- Guides air along the ceiling so that it spreads further across the room
- Foldable drip tray on both sides allows easy access for cleaning and maintenance
- EC fans deliver significant energy cost savings with long service life
- Draught-free air circulation and quiet operation for a pleasant environment in workplaces
The Kelvion KDC guides air along the ceiling so that it spreads out throughout the room due to the Coanda effect. The Kelvion KDC can therefore achieve top air flow with a very low air speed. Power range from 1.4 kW to 23 kW. The folding drip tray also allows for easy cleaning. All installation parts are easy to access and easy to clean. The fan can be replaced quickly and easily. The drip tray can be removed easily for carrying out maintenance and cleaning activities on the air cooler. Folds out on both sides. If the optionally available condensation water pump is installed, the drainage pipe must not be removed.
Features
Housing
- Sendzimir galvanised steel, smooth
- High-quality powder coating, RAL 9010
- Food safe
- Easy to clean
- High-quality all-round corrosion protection
- Easy access for cleaning and maintenance thanks to drip tray that folds open on both sides
- Removable side covers
- Compact dimensions
Electrical ...?xml>
Housing
- Sendzimir galvanised steel, smooth
- High-quality powder coating, RAL 9010
- Food safe
- Easy to clean
- High-quality all-round corrosion protection
- Easy access for cleaning and maintenance thanks to drip tray that folds open on both sides
- Removable side covers
- Compact dimensions
Electrical defrosting:
- Tubular heating element made from stainless steel
- Connections: Vapour-tight
- Power supply: 1/N/PE 230 V 50/60 Hz
- Wired to terminal box, ready to connect
- Fast and even defrosting thanks to an optimised tubular heating configuration
- Stainless steel heating elements, best heat transfer to the fins guaranteed in thermal conduction pipes and thus efficient defrosting cycles with optimised idle periods
Heat exchanger:
- Pipe: Copper, inside ribbing Ø 12 mm
- Fins: HFE-Lamelle® made from aluminium
- End plate: Aluminium
- Offset piping system
- Fin spacings: Spacing = 4.5 mm W = 7.0 mm
- Fins engage with the core pipe with a bell joint
- Inner purity according to EN 14276
- Inlet connections:
Distributor with copper pipe for solder connection, optional multi injection via CAL® distributor - Outlet connection:
Copper pipe for solder connection with Schrader valve UNF 7/16”, fully sealed
Fan
- EC-ESM technology
- Two speed operation
- Fan diameter: 350 mm
- Approved temperatures for motor operation -25 °C to +40 °C
- Power supply: 1/N/PE 230 V 50/60 Hz
- Motor protection: Internal thermal contact (not led through)
- Protection rating IP54
- Insulation class B
- Fans wired to 1 internal terminal box
- Optional features for V1.52:
Fan adjustable via interface from 0 up to 10 V
(Speed can be controlled from 100% to minimum 50%)
Optional variants:
Motor variants:
- V1.52 EC fan, with speed control
Housing variants:
- V3.08 cover plate for protecting against dust and dirt deposits
- V3.09 double insulated drip tray
Prevent build up of condensation on the base of the tray, reduces heat from defrosting being transferred to the cold storage area
Other design variants:
- V2.05 and V2.06 water / brine flow
- Small and large distributors, 16 bar max. pressure
- V4.06 electrical defrosting required in the drip tray for operating device in air temperatures below -18 °C
- V6.22 multiple injection with CAL distributor
Anti-corrosion variants:
- V6.01 Corrosion protection 1
Pipe: Copper
Fins: Aluminium with epoxy resin coating
End plates: Aluminium with protective coating
Housing: Sendzimir galvanised steel,
protective coating on both sides - V6.04 Corrosion protection 4
Pipe: Copper
Fins: Aluminium with epoxy resin coating
End plates: Aluminium
Housing: Sendzimir galvanised steel, protective coating on one side
CO2 Variants:
- V7.45 CO2 direct expansion at max. 45 bar operating pressure
- V7.90 CO2 direct expansion up to max. 90 bar operating pressure
Accessories / Replacement parts
-
Block heating
-
Elektrisches Heizregister (pro Verdampfer 2 Stk. nötig)
-
Sump heating
-
Ventilation unit / EC motor
Technical data
1) Standard conditions:
NB1 = tL1 +10 °C / t0 0 °C / DT1 10 K
NB2 = tL1 0 °C / t0 -8 °C / DT1 8K
NB3 = tL1 -18 °C / t0 -25 °C / DT1 7 K
NB4 = tL1 -25 °C / t0 -31 °C / DT1 6 K
2) Single injection via Venturi distributor / expansion valve with external pressure equalisation required;
Optional multi-injection via CAL distributor (on request)