Euro Line compressor kit Slim Rack EV1DO-SR-CO2-CDS101B

Schiessl Euro Line Slim Racks work with 1 semi-hermetic Dorin compressor from the CDS series. Cooling capacity is regulated depending on the intake pressure. A Power Electronics A1000 frequency converter with cooling software is used for control. In the event of a fault on the FC, the system can run in emergency mode operation via an additional low pressure switch.
The unit is designed for subcritical operation in the low temperature range. It must be
connected to a medium-temperature rack or a regulated low-temperature unit to enable operation as a cascade.
Medium-temperature cooling must have at least the condensing capacity of the low-temperature unit, but can also be a larger medium-temperature system with additional low-temperature cooling points. The connection to the medium-temperature system must be on site.
The unit frame consists of laser-cut and powder-coated steel elements. The unit must be set up horizontally using a spirit level on the supplied metallic vibration-damping feet.

•    Future-proof and environmentally friendly thanks to natural CO2 refrigerant
•    Ideal and inexpensive version for lower performance
•    Easy connection to any normal cooling network or condensing unit with R134a NK
•    Optimal adaptation of the cooling capacity to the cooling requirements of the system through the inverter
• compact size means minimal space is required
•    Energy saving through cascade operation
•    service-friendly structure

•    1 semi-hermetic Dorin CO2 compressor CDS series
• Crankcase heater
• High pressure monitor, type tested
• Low pressure monitor, type tested
• Low pressure switch for emergency operation
•    Pressure transmitter HP and LP
•    Desuperheater, air-cooled
•    Cascade plate with shut-off valves and injection valve for R134a NK stage
•    Collector, insulated
• Drier inspection glass
•    Suction gas exchanger
•    Suction filter
• Control cabinet with frequency converter and superheat regulator, injector valve cascade plate
•    Pressure range on the high pressure side 52 bar / on the low pressure side 28 bar