Copeland fully hermetic exchange compressor ZB56K*E-TWD-951 400V
Description
The Copeland scroll compressors in the ZS*KA series represent a key new development in scroll technology for refrigeration systems with low capacities of 4 m³/h to 5 m³/h.
As with other Copeland scroll compressors, the ZS*KA scroll compressors also feature a scroll compliance mechanism ...
The Copeland scroll compressors in the ZS*KA series represent a key new development in scroll technology for refrigeration systems with low capacities of 4 m³/h to 5 m³/h.
As with other Copeland scroll compressors, the ZS*KA scroll compressors also feature a scroll compliance mechanism that makes them particularly durable and makes them extremely reliable even under difficult conditions (e.g. liquid hammering).
The Z*KA models are designed for normal refrigeration systems and ideally suited to open fridges, cold stores, milk tank coolers and refrigerated cabinets in supermarkets. These models allow the use of different refrigerants and stand out for their quiet and low vibration operation. This makes them particularly suitable for use in retail and catering. Typical areas of use include supermarkets, restaurants, mini-marts and milk cooling systems.
The ZS*KA series with 1.3 to 1.8 hp offers an annual efficiency that is up to 28% higher than that of conventional hermetic piston compressors. These compressors are approved for use with refrigerants containing HFCs, new refrigerants with a low greenhouse warming potential and HFO mixtures. This series is approved for refrigerants R407A/F/C, R448A/R449A, R404A/R507A and R134a.
Lubrication
Ester oil, factory filled: Emkarate RL 32 3MAF (531.2827, 1 litre can)
For applications where noise levels must be kept extremely low, noise reduction covers are available for all scroll refrigerant compressors. Tests with this noise reduction cover have shown a 7 dBA reduction.
Scope of delivery
The “951” versions of the servicing compressor include:
- Compressor with Rotalock threaded adapter
- Individual packaging
- Oil inspection glass and oil Schrader valve
- “Rubber” installation kit for single compressor operation
- Motor protection module, 110 / 230 V AC, pre-wired in electrical ...
The “951” versions of the servicing compressor include:
- Compressor with Rotalock threaded adapter
- Individual packaging
- Oil inspection glass and oil Schrader valve
- “Rubber” installation kit for single compressor operation
- Motor protection module, 110 / 230 V AC, pre-wired in electrical connection box
- Ester oil and inert gas filling
- Gasket set 8565527 (998-0779-00) (packed in single pack)
- Teflon sealing ring for intake and delivery side
- Teflon sealing ring for oil inspection glass / OM Traxoil connection
Ausstattung
Die Service-Verdichter in der Ausführungsvariante "951" beinhalten:
- Verdichter in Ausführung mit Rotalock-Gewindestutzen
- Einzelverpackung
- Ölschauglas und Öl-Schraderventil
- Montagesätze "Gummi" für den Betrieb als Einzelverdichter
- Motorschutz-Modul 110/230VAC, vorverdrahtet im ...
Die Service-Verdichter in der Ausführungsvariante "951" beinhalten:
- Verdichter in Ausführung mit Rotalock-Gewindestutzen
- Einzelverpackung
- Ölschauglas und Öl-Schraderventil
- Montagesätze "Gummi" für den Betrieb als Einzelverdichter
- Motorschutz-Modul 110/230VAC, vorverdrahtet im Elektro-Anschlusskasten
- Esteröl- und Schutzgasfüllung
- Dichtungssatz 8565527 (998-0779-00) (packed in Single pack)
- Teflon-Dichtring für Saug- und Druckseite
- Teflon-Dichtring für Ölschauglas / OM Traxoil Anschluß
Accessories / Replacement parts
-
Adapter for OM3/OM4/OW4
-
Adapter set
-
Crankcase heater
-
Electronic Oil level regulation system
-
Motor protection
-
Oil sight glass
-
Refrigerator oil
-
Rotalock valves set
-
Sound insulation hood
-
Transformer
Technical data
Spannung = 400 V (siehe Erläuterung 3)
Note
- Compressors are delivered with an initial filling. The specified quantity is needed when refilling.
- Values are for the lowest rated voltage (50 Hz)
- Highest value in nominal voltage range
