1. Products
  2. Mitsubishi air conditioner Lossnay wall-mounted unit VL-50S2-E
Wall-mounted units

Mitsubishi air conditioner Lossnay wall-mounted unit VL-50S2-E

Mitsubishi air conditioner Lossnay wall-mounted unit VL-50S2-E
Icon. Image similar to product.
Mitsubishi Electric Logo
Order No.: 719.3362
Manufacturer number: 302486
Manufacturer: Mitsubishi

One click to the most important information:

Description

Decentralised ventilation unit with heat recovery for rooms up to approx. 60 m² (recommended room size 25-35 m² at lowest level - highest efficiency with very quiet operation). Simultaneous operation of inlet and exhaust fans. The device is equipped with a powerful heat recovery system: ...

Decentralised ventilation unit with heat recovery for rooms up to approx. 60 m² (recommended room size 25-35 m² at lowest level - highest efficiency with very quiet operation). Simultaneous operation of inlet and exhaust fans. The device is equipped with a powerful heat recovery system: the structure of the paper cross-flow heat exchanger allows the sensitive and latent heat component to be exchanged and transferred to the fresh air. The device can be installed both vertically and horizontally, depending on the structural conditions. A drill hole in the outdoor wall 120 mm in diameter will suffice for installation.

show more

Features

  • It is sufficient to drill a hole with a diameter of 120 mm to mount the practical wall device.
  • The device operates very quietly: Low: 15 db(A) and high: 37 db(A)
  • Two ventilation speeds are available (high/low). Switchover to "exhaust air operation only" possible.
  • Supply and exhaust air pipes as ...
  • It is sufficient to drill a hole with a diameter of 120 mm to mount the practical wall device.
  • The device operates very quietly: Low: 15 db(A) and high: 37 db(A)
  • Two ventilation speeds are available (high/low). Switchover to "exhaust air operation only" possible.
  • Supply and exhaust air pipes as well as protective caps to prevent rainwater penetration are included in the scope of delivery.
  • Alternative stainless steel air outlets are available as accessories.
  • Operating range: -10°C to 40°C outdoor temperature, only exhaust air operation: -20°C to 40°C.
  • Switch by pull cord

show more

Accessories / Replacement parts

  • Duct connector
    Mitsubishi Lossnay duct connector P-50PJ-E
    Mitsubishi Lossnay duct connector P-50PJ-E
    Order No.: 719.3368
  • Duct extension
    Mitsubishi Lossnay duct extension P-50P-E
    Mitsubishi Lossnay duct extension P-50P-E
    Order No.: 719.3367
  • High performance filter
    Mitsubishi Lossnay high performance filter P-50HF2-E
    Mitsubishi Lossnay high performance filter P-50HF2-E
    Order No.: 719.3366
  • Replacement filter
    Mitsubishi Lossnay replacement filter P-50F2-E
    Mitsubishi Lossnay replacement filter P-50F2-E
    Order No.: 719.3365
  • Stainless steel outside hood
    Mitsubishi Lossnay stainless steel outdoor hood P-50VSQ5-E
    Mitsubishi Lossnay stainless steel outdoor hood P-50VSQ5-E
    Order No.: 719.3369

Technical data

Dimensions
Width
522 mm
Height
245 mm
Depth
168 mm
General information
Construction
Wandgerät
Efficiency
85 %
low
 
69 %
high
Electrical Data
Supply voltage
230/1/50 V/Ph/Hz
Weight
Circa
6,2 kg
Performance data
Volume flow rate
16 m³/h
low
 
52.5 m³/h
high
Sound data
Sound pressure level
15 dB(A)
low
 
37 dB(A)
high
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.

Login now for complete access

To login