Domestic hot water heaters

DK domestic water heater with correx anode 1000/5 1000L 6bar with PVC insulation B1

Order No.: 760.6107
Manufacturer number: S10103
Manufacturer: DK-Kälteanlagen

More in this category: Domestic hot water heaters

One click to the most important information:

Description

Best possible energy efficiency using a patented water layering principle (see diagram in the component catalogue). Optimal safety with a double-walled heat exchanger and the ability to connect leak indicators. Outstanding corrosion-protection from a special enamel coating on the container and ...
Best possible energy efficiency using a patented water layering principle (see diagram in the component catalogue). Optimal safety with a double-walled heat exchanger and the ability to connect leak indicators. Outstanding corrosion-protection from a special enamel coating on the container and non-galvanising integrated heat exchangers. This ensures that no corrosion can occur due to the various properties of the materials used. Easy to service with an NW 200 inspection flange to which no parts are attached. In existing systems, additional heat exchangers can be added up to the maximum possible, without having to remove those that are already installed. Easy to install using removable foam insulation with a PVC sheath. There are no connections at the rear of the container so that insulation can be installed with minimal distance from the wall. All heat exchangers can be configured to lead out to a particular side for easier connection to the refrigerant supply on request. Higher power system can have several heat exchangers set up in parallel. (Additional costs apply)<br><br>Standing tank designed for 6 bar operating pressure, special container enamel, magnesium anode, including thermometer and insulation. Connections cold/hot water 11/4”.<br>NW 200 inspection flange on side of tank casing.<br><br>DX process water heaters need to be handled carefully during transport. The enamel layer is sensitive to shocks and impacts. The heat exchanger is attached to the pipe ends in the bottom of the tank without any additional supports. If transporting over long distances, the process water heater must be placed upright. If not otherwise possible, it can be delivered laid down provided that a truck with good suspension is used.

show more


Accessories / Replacement parts

  • Boiler thermostat
    DK boiler thermostat +25°C to +90°C S30001
    Order No.: 760.6130
  • Heat exchanger
    DK finned tube heat exchanger WT 16/10 0,8qm tinned
    Order No.: 760.6121
  • DK finned tube heat exchanger WT 18/12 1,2qm tinned
    Order No.: 760.6122
  • DK surcharge f. interconnection of 2 heat exchangers
    Order No.: 760.6134
  • DK surcharge f. interconnection of 3 heat exchangers
    Order No.: 760.6135
  • DK surcharge f. interconnection of 4 heat exchangers
    Order No.: 760.6136
  • DK surcharge f. interconnection of 5 heat exchangers
    Order No.: 760.6137
  • DK finned tube heat exchanger WT 16/10 0,4qm tinned
    Order No.: 760.6149
  • DK finned tube heat exchanger WT 28/20 1,5qm tinned
    Order No.: 760.6151
  • DK finned tube heat exchanger WT 22/16 2,0qm tinned
    Order No.: 760.6123
  • DK finned tube heat exchanger WT 28/20 3,0qm tinned
    Order No.: 760.6124
  • Heating cartridge
    DK electric heating R 1-1/2'' with thermostat Type 2,0 kW S30004
    Order No.: 760.6126
  • DK electric heating R 1-1/2'' with thermostat Type 3,0 kW S30005
    Order No.: 760.6127
  • DK electric heating R 1-1/2'' with thermostat Type 4,5 kW S30006
    Order No.: 760.6128
  • DK electric heating R 1-1/2'' with thermostat Type 6,0 kW S30007
    Order No.: 760.6129
  • Impressed current anode
    DK CORREX impressed current anode for heat recovery with 2 sensor elements S31000
    Order No.: 760.6152
  • Superheating protection thermostat
    DK superheating protection thermostat required when installing an electric heater
    Order No.: 760.6133
  • Thermometer
    DK thermometer 0-120°C f. heat recovery function S33500
    Order No.: 760.6132

Technical data

Dimensions
Diameter (without insulation)
750 mm
Height (without insulation)
2505 mm
General information
Insulation
WeichschaumIsolierung
Possible to install heat exchangers
Normal version
4 WT bis 28/20 und 1 WT bis 22/16
Special version
8 WT bis 16/10 und 6 WT bis 18/12 oder 6 W
Insulation
2505 mm
Type
DK1000/5 m.PVC
maximum installation option
5 pcs
Wärmetauscher
Weight
Weight net
278 kg
Volume
Nominal content
1000 l
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.

Customers also bought...

Loading

Login now for complete access

To login
Delivery item. Delivery time on request