Cooling controller

Dixell cooling controller XR77CX-0N6C3 | 12 V | with buzzer | without RTC

Order No.: 295.3459
Manufacturer number: XR77CX-0N6C3
Manufacturer: Dixell

More in this category: Cooling controller

Loading

One click to the most important information:

Description

The XR77CX is a cooling regulator for panel installation, 32 x 74 mm, suitable for normal and low temperature applications.
Four relays are available:
Cooling, defrosting
(electrical or hot gas), evaporator fan and an auxiliary input that can be configured for lighting, fault alerts or an ...

The XR77CX is a cooling regulator for panel installation, 32 x 74 mm, suitable for normal and low temperature applications.
Four relays are available:
Cooling, defrosting
(electrical or hot gas), evaporator fan and an auxiliary input that can be configured for lighting, fault alerts or an auxiliary thermostat.

Thanks to the integrated real time clock (options), it is possible to program defrosting and target value changes (energy-saving mode) for specific times and days.
The available sensor inputs (NTC or PT1000) are as follows:
Room temperature, evaporator temperature and two additional configurable sensors. The third sensor input shares the physical connection with the first digital input so that this input can be used for both digital status messages as well as for analogue measurements.
The integrated RS485 connections allow direct ModBus RTU communication without additional accessories e.g. with a monitoring system or the XWEB range. The regulator can be easily configured using a HotKey parameter storage card. The HotKey connection can also be used for an Xrep remote display.

show more


Features

  • Simple programming mode
  • Fast cooling using pre-set target value
  • Serial connection to remote monitoring system

Accessories / Replacement parts

  • Interface adapter
    Dixell interface adapter XJ485CX+CAB/RS
    Order No.: 291.3435
  • NTC pipe contact sensor
    Dixell pipe contact sensor NTC NT6 1.5m
    Order No.: 298.3401
  • Dixell pipe contact sensor NTC NP4-67 1.5m
    Order No.: 298.3439
  • Dixell pipe contact sensor NTC NT6-67 1.5m
    Order No.: 298.1806
  • NTC temperature sensor
    Dixell temperature sensor NTC NS6S 1,5m (silicone blue) 6x40mm V2A
    Order No.: 298.1717
  • Dixell temperature sensor NTC NS6S 3,0m (silicone blue) 6x40mm V2A
    Order No.: 298.1724
  • Dixell temperature sensor NTC NG6 1,5m (black) 6x15mm plastic
    Order No.: 298.1715
  • Dixell temperature sensor NTC NG6 3,0m (black) 6x15mm plastic
    Order No.: 298.1718
  • Dixell temperature sensor NTC NG6 6,0m (black) 6x15mm plastic
    Order No.: 298.3426
  • Dixell temperature sensor NTC NS6 1,5m (light grey) 6x40mm V2A
    Order No.: 298.1719
  • Dixell temperature sensor NTC NS6 3,0m (light grey) 6x40mm V2A
    Order No.: 298.1716
  • PT1000 pipe contact sensor
    Dixell pipe contact sensor PT1000 PMT6-67 1.5m
    Order No.: 298.1805
  • Programming key
    Dixell programming key Hot Key
    Order No.: 291.3406
  • Rubber seal
    Dixell rubber seal for 74 x 32 mm | Compatible with all devices
    Order No.: 298.1722
  • Transformer
    Dixell transformer TF3 | 3 VA | 230 => 12 V AC | VDE
    Order No.: 298.1757
  • Dixell transformer TF5 | 5 VA | 230 => 12 V AC
    Order No.: 298.1799

Technical data

Dimensions
Cutout for panel mounting
71 x 29 mm mm
Width
74 mm
Height
32 mm
Depth
60 mm
General information
Resolution
0.1 °C
Buzzer
NEIN
Sensor type
NTC oder Pt1000
Accuracy
±0.7°C; ±1 Ziffer
Interface
RS485
Connections
Serial interface
RS485
Electrical Data
Inputs
4x
NTC or PT1000,
 
2x
digital input zero potential
Power consumption
3 VA
Relay outputs
cooling:
10 (4) A;
 
evaporator fan:
5 (2) A;
 
defrost:
10 (4) A;
 
oA3:
7 (2) A;
Protection class
IP20
Front protection: IP65
Supply voltage
12 V
AC/DC
Temperature data
Storage temperature
-25 bis 60 °C
Temperature range
NTC sensor
-40 bis 110 °C
Temperature measuring range
max.
55 °C
min.
0 °C

Detailed technical data can be found in the operating manual under downloads!

Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.

Customers also bought...

Loading

Login now for complete access

To login
Available in another country - please contact your local office