Ceiling evaporators cubic

ECO air cooler industry ICE 52 D10-ED with heating

Order No.: 164.3150
Manufacturer number: ICE52D10ED
Manufacturer: Modine / ECO

More in this category: Ceiling evaporators cubic

Loading

One click to the most important information:

Description

The ICE series is used in large refrigeration cells and storage rooms for storing fresh and frozen products.
The high-performance heat exchangers found in all models in this series are made using special profile aluminium fins and are produced for use with copper pipes suitable for modern ...

The ICE series is used in large refrigeration cells and storage rooms for storing fresh and frozen products.
The high-performance heat exchangers found in all models in this series are made using special profile aluminium fins and are produced for use with copper pipes suitable for modern refrigerants.

Two different variants depending on cell temperature:

  • ICE 06 for high and medium temperatures (= -15 °C) with fin spacing of 6.0 mm;
  • ICE 10 for low temperatures (= -35 °C) with fin spacing of 10 mm, ED electrical defrosting recommended.

The standard motor fans have two different speed settings and the following properties:

  • Diameter 450, 560 and 630 mm, alternating current 400 V/3/50 Hz with double speed, external rotor and protective grille made from steel coated with epoxy paint.
  • Protection class IP 54;
  • Insulation class B (F for Ø 630);
  • Inner temperature monitor;
  • Operating temperature -40 °C to +40 °C.

Versions with standard ED defrosting are equipped with stainless steel heating elements and vulcanised end terminators and intended for use with a 400 V/3/50-60 Hz connection.
The units are ready for connection to an earth terminal, motor and heating element connections are in separate junction boxes with an IP 54 protection rating.

Models with different heat exchangers, defrosting mechanisms and motor fans can be provided on request.
Use the “Scelte“ program from Modine to select models that function in conditions other than standard conditions stated in the catalogue.
Please get in touch with our technical advisors if you have special application requirements or need further information.

show more


Accessories / Replacement parts

  • Defrost heating
    ECO tubular heating element HL block 2370mm 2140W f. ICE/IDE52 MN262612
    Order No.: 164.2654
  • ECO tubular heating element NL block 2370mm 1070W f. ICE/IDE52 MN262712
    Order No.: 164.2665
  • ECO tubular heating element HL drip tray 2330mm 2140W f. ICE52 MN275005
    Order No.: 164.2678
  • ECO tubular heating element NL drip tray 2330mm 1070W f. ICE/IDE52 MN275305
    Order No.: 164.2690
  • Motor ventilators
    ECO fan unit 400V OLD FC 056 VDK 4I6 f.KPL/KPM 199920
    Order No.: 164.2976
  • Outlet screw connection
    ECO drain fitting R 3'' f.ICE D=560mm u.630mm 263202
    Order No.: 164.2643

Technical data

General information
Application
Luftkühlung
Type
Deckenverdampfer kubisch
Fin spacing
10 mm
Type
ICE52D10 ED
Connections
Defrosting
11/4“ Inch
Defrost water drain
3“ Inch
Electric defrosting
Block
ICE (high performance)
5x 2140 W
ICE (low performance)
5x 1070 W
Total
ICE
19260 W
Power
19260 W
Tray
ICE (high performance)
1x 2140 W
ICE (low performance)
1x 1070 W
Water quantity
7000 l/h
Electrical Data
Supply voltage
Fan
400/3/50 V/Ph/Hz
Surfaces
Surface
134,4 m²
Weight
Weight net
240,0 kg
Mit Heizung=ja
Performance data
Nominal capacity
41,5 kW
t0=-8°C, DT1=8K, R404A
 
34 kW
t0=-8°C, DT1=8K, R404A
Nennleistung, t0=-8°C, DT1=8K, R404A
41,5 kW
Motordrehzahl=hoch min-1
 
34 kW
Motordrehzahl=niedrig min-1
Pipe connections
Outlet
Diameter
54 mm
Inlet
Diameter
35* mm
Fan data
Rotational speed
high
1220 rpm-1
low
900 rpm-1
Air throughput
High rotational speed
18860 m³/h
Low rotational speed
13580 m³/h
Number of fans
2 pcs
Pcs x diameter
2 x 560 mm
Fan power
high
2000
W total
 
3.6
A total
low
1200
W total
 
1.9
A total
Throw distance
at high speed
32 m
at low speed
23 m
Volume
Pipe volume
66 dm³
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.
Loading

Login now for complete access

To login
Delivery item. Delivery time on request