Danfoss cable for PC f. AK-SM 3m 080Z0262

The model AK-SM 350 is a data recording and monitoring unit for cooling systems in smaller supermarkets.
It records temperatures in various refrigeration units and cabinets and stores these for use as evidence that official regulations are being observed.
Threshold values can also be entered. If these are exceeded, then an alarm is triggered. The alarm message appears on the display and can be sent to an external recipient (person with a mobile phone or a service provider). The unit is attached at a central location in the shop. The clear user-interface means that it is easy to see the various temperature measurements. With just a few key presses, various temperature change graphs can be shown and the cause of an alarm can be viewed on the display.
All shop employees will be able to operate the unit and authorised persons can enter a password to make changes to the settings.
Configurations and settings can be input via the input field on the front panel of the device. Where many values need to be entered for many different settings, use of the AK-ST software is recommended. This program is installed on a computer. If several AK-SM 350 units are to be programmed with the same settings, the data backup and restore functions in the AK-ST program will prove useful.

Compact unit for recording temperatures
 

• Records temperature data (HACCP) for regulatory authorities
• Alarm function

Local alarm or via modem/IP
Alarm on temperature deviations
Alarms if doors to cold or frozen storage areas are opened

• Text can be added to describe measurement locations

The device can monitor up to 65 measurements.
Possible input types are:

• Up to 16 directly connected sensors or switch functions
• Signals from various type EKC and AK cooling controllers via the network
• Signals from inputs at the expansion module(s) m2+ and from the gas detectors.

These measurement values are also sent via the network.

• Pulse rate function for energy meters
• All defined points can be recorded and saved at defined time intervals.
• Values can be shown on the display or accessed by connecting a printer or PC and modem.