Floor mounted units

Mitsubishi air conditioner City Multi indoor standing unit PFFY-P20 VCM-E without cladding

Mitsubishi Electric Logo
Order No.: 719.4761
Manufacturer number: PFFY-P20 VCM-E
Manufacturer: Mitsubishi

More in this category: Floor mounted units

Loading

One click to the most important information:

Description

Optionally available without cladding so that this ultra-modern air conditioning unit can be made to blend seamlessly into the room architecture. At just 200 mm deep, these units can be installed in the peripheries of rooms and provide top performance.

Furthermore, the chest units feature a ...

Optionally available without cladding so that this ultra-modern air conditioning unit can be made to blend seamlessly into the room architecture. At just 200 mm deep, these units can be installed in the peripheries of rooms and provide top performance.

Furthermore, the chest units feature a dehumidifier function that stabilises the humidity in the room as the temperature changes. Further cooling is prevented and the air dehumidified in order to keep it fresh and invigorating.

DIP switches on the unit allow you to choose from four different pressures. This allows the device to be adapted for different installation situations.

The DC fan motors ensure very efficient operation at high pressure and with low noise.

show more


Features

  • Microprocessor control for monitoring target temperature in cooling mode from 19 °C to 30 °C, in heating mode from 17 °C to 28 °C. Automatic switching between heating/cooling (R2 systems only or using optional TG2000 software with G50 central remote control).
  • Special program for ...
  • Microprocessor control for monitoring target temperature in cooling mode from 19 °C to 30 °C, in heating mode from 17 °C to 28 °C. Automatic switching between heating/cooling (R2 systems only or using optional TG2000 software with G50 central remote control).
  • Special program for dehumidifying room air. All values entered are saved in the event of power failure.
  • Automatic restart after power failure, temperature adjustment in heating mode, air outlet direction can be adjusted in cooling mode, lock or release the slats, autostart for indoor units when power supply active, external static pressure can be selected via DIP switch.
  • Timer control. Fault diagnostics system with fault memory. In the event of a fault, the unit is immediately shut off and an error code is displayed on the remote control.
  • The LEV valve is closed via the voltage bus to protect against ice formation.
  • Faults in other devices in the system are shown on the remote control and indicate the device number (address).
  • Monitoring and control of the integrated electronic injection valve (LEV) along the MSS curve in order to achieve optimum efficiency for the heat exchanger in all operating states.
  • Three thermistors form a 3-point regulating circuit for precisely maintaining the set room temperature.
  • Monitoring of evaporator surface temperature with protection against ice formation.
  • Testing and emergency operation programs.

show more


Accessories / Replacement parts

  • Signal transmission booster
    Mitsubishi signal transmission amplifier PAC-SF 46 EPA-F
    Order No.: 719.2220
  • Adapter for ingoing signals
    Mitsubishi adapter cable PAC-SE55RA-E remote on/off
    Order No.: 719.2797
  • Adapter for outgoing signals
    Mitsubishi adapter cable PAC-SA88HA-E
    Order No.: 719.2218
  • BACnet™-Interface-Module
    Mitsubishi BACnet Interface BAC HD150
    Order No.: 719.2570
  • Cable remote control
    Mitsubishi cable remote control PAR-33MAA Deluxe
    Order No.: 719.2588
  • Mitsubishi Smart ME wired remote control PAR-U02MEDA-K
    Order No.: 719.3787
  • Mitsubishi cable remote control PAC-YT52CRA compact
    Order No.: 719.3492
  • Central system control
    Mitsubishi City Multi central controller AE-200E
    Order No.: 719.4225
  • External ambient temperature sensor
    Mitsubishi temperature sensor PAC-SE41TS-E external
    Order No.: 719.2507
  • Group remote control
    Mitsubishi City Multi group remote control AT-50B-J f. max. 50 indoor units
    Order No.: 719.2569
  • Infrared receiver unit
    Mitsubishi City Multi infared receiver unit PAR-FA32MA-E
    Order No.: 719.2208
  • Infrared remote control
    Mitsubishi infrared remote control PAR-FL 32 MA-E encoder section City Multi
    Order No.: 719.2207
  • Interface box
    Mitsubishi maintenance tool CMS-MNG-E hardware and software
    Order No.: 719.2513
  • LonWorks®-Interface
    Mitsubishi LonWork interface LMAP04-E
    Order No.: 719.3748
  • Mel-Cloud WiFi-Adapter
    Mitsubishi Wi-Fi adapter MAC-567IF-E (smartphone/tablet)
    Order No.: 719.4353

Technical data

Dimensions
Width
700 mm
Height
690 mm
Depth
200 mm
General information
Application
Kühlen und Heizen
Type
VRF
Construction
Truhengerät
Refrigerant
R410A
Electrical Data
Nennbetriebsstrom
Heizen
0,25 A
Kühlen
0,25 A
Supply voltage
230/1/50 V/Ph/Hz
Weight
Weight net
18,0 kg
Performance data
Air volume
Heating (high)
420 m³/h
Cooling (high)
420 m³/h
Nominal heating capacity
2,50 kW
Nominal cooling capacity
2,20 kW
Nominal power consumption
Heating
0,022 kW
Cooling
0,022 kW
Pipe connections
Liquid line
6 mm
Gas line
12 mm
Sound data
Schalldruckpegel
Heizen
(Niedrig/Mittel/Hoch)
21 / 23 / 26 dB(A)
Kühlen
(Niedrig/Mittel/Hoch)
21 / 23 / 26 dB(A)
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.

Customers also bought...

Loading

Login now for complete access

To login
Delivery item. Price on request