LG air conditioner standard wall S18EQ.NSK R32

This designer air conditioning unit with a flat profile in white is intended for wall mounting (near the ceiling). The unit features a “Dual Protection” filter that removes dust particles from the air down to 10 µm in size. The filter can be removed quickly, regenerated and is easy to clean. The housing is made of plastic.
There is a removable panel on the base of the unit under which you will find all the necessary connections. There is no need to remove all the cladding elements. There is also a mounting clip that provides both sufficient distance between the wall and the unit and fixes the pipes in place to make mounting much easier. With the standard model, the WiFi control module is only an option for retrofitting.
The fan (BLDC motor) is directly driven and mounted with vibration insulation. The extremely quiet radial fan is dynamically balanced and has 4 different speeds. Skew fan: By minimising the surface pressure on the fan blades when in contact with air, peak noise is reduced to become the quietest in the world.
The direction of the vertical louvres can only be adjusted manually on the Standard model.
The Jet Cool function distributes air evenly at high speed and guarantees optimum and fast cooling.
The condensate tray is made of plastic and insulated to prevent condensation forming.  Drainage nozzles on both sides. One side features a drainage plug and the other a flexible condensate hose. This unit does not contain a condensate pump as standard.
The unit comes with an infrared remote control as standard.
Wired remote controllers cannot be connected to the Standard model.

• Monitoring of set target temperature,
• Cooling also in winter, operational limit at -10°C,
• Special room dehumidification program (unregulated),
• "Fuzzy Logic" control for convenient room temperature regulation,
• Automatic fan control based on room temperature,
• All input values are saved in the event of a power failure,
• Automatic restart after power failure,
• 24-hour timer (on and/or off) applies for just one day,
• Fault diagnostics system,
• Monitoring of evaporator surface temperature (frost protection and defrosting),
• Indoor unit features a self-cleaning function,
• Antibacterial filter,
• Automatic mode switching, cooling/heating (with single split only)