Mitsubishi M-Series concealed duct unit with heat pump + inverter SEZ-KD60 VAQ without remote control
One click to the most important information:
Description
The units for duct installation can be installed in false ceilings. The conditioned air is transported via the air guides and ducts into the room.
External static pressure up to 50 Pa. Four different external static pressures are however available: 5 – 15 – 35 – 50 Pa.
Simple to ...
The units for duct installation can be installed in false ceilings. The conditioned air is transported via the air guides and ducts into the room.
External static pressure up to 50 Pa. Four different external static pressures are however available: 5 – 15 – 35 – 50 Pa.
Simple to install in low ceilings. Due to the low installation height of just 200 mm. Optional condensate pump with a delivery head of up to 55 cm. Selectable fan speed from low, medium and high.
Features
- SCOP up to 4.1 / SEER up to 5.7
- Energy efficiency rating up to A+ / A+
- Acoustic pressure from 22 dB(A)
- Optional cable remote control with weekly timer
Technical data
(Niedrig/Mittel/Hoch)
(Niedrig/Mittel/Hoch)
(Niedrig/Mittel/Hoch)
Notes
1) Our air conditioning systems and heat pumps contain fluorinated greenhouses gases R410A, R407C, R134a, R32.
2) Acoustic pressure level for indoor device measured centrally at 1.5 m below the device at 15 Pa static pressure.
3) Technical data may differ if used in combination with a Hyper Heating device.
4) Further information can be found in operating manual.
