Contact adhesives
Armaflex adhesive HT 625 can 1,00L
Icon. Image similar to product.
Order No.: 348.0986
Manufacturer number: ADH-HT625/1,0
Manufacturer: Armacell
More in this category: Contact adhesives
Loading
One click to the most important information:
Description
The HT 625 adhesive is a single-component adhesive specially developed for insulating objects containing mediums up to +175 °C. It can be used with all Armstrong insulation materials based on synthetic rubber. The adhesive is resistant to the effects of weather and aging has excellent ...
The HT 625 adhesive is a single-component adhesive specially developed for insulating objects containing mediums up to +175 °C. It can be used with all Armstrong insulation materials based on synthetic rubber. The adhesive is resistant to the effects of weather and aging has excellent chemical-resistance.
Features
- Preparation: The guidelines for working with adhesive 520 also apply here. The special cleaning solution should be used for cleaning the surface. Ideal working temperature is +20 °C. Do not use below ±0 °C.
- Use: Use is the same as for adhesive 520. Please note that the airing time can ...
- Preparation: The guidelines for working with adhesive 520 also apply here. The special cleaning solution should be used for cleaning the surface. Ideal working temperature is +20 °C. Do not use below ±0 °C.
- Use: Use is the same as for adhesive 520. Please note that the airing time can be quite a lot shorter. The adhesive stands out for its excellent initial adhesion.
- Pipe insulation: The guidelines for applying the adhesive and joining the surfaces are the same as for adhesive 520. If you see no threads when touching and lifting your finger (finger test) but the surface still feels cold, the adhesive needs to be left a little longer to air (approx. 30 seconds).
- Vessel insulation: Apply the HT 625 adhesive thinly across the entire surface of the insulation plate and the surface to which it will be stuck. To keep the amount of solvent to a minimum, the adhesive should be left to air for about 5 minutes depending on how thickly it has been applied.
- Drying time: 36 hours
- Storage: As cool as possible, but free from frost. Jellification that occurs due to frost is reversible
- Storage life: approx. 1 year
- Normal yield: 3-4 m2 per litre when applied to entire surfaces for plate material (when applied to both surfaces)
Technical data
General information
Application
Kontaktkleber
Type
HT 625
Volume
Content
1,0 l
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.
Loading
