Mitsubishi heat pump set 10.3 Zubadan PUHZ-SHW140YHAR5 / ERST20C-VM2C
One click to the most important information:
Description
Split type air/water heat pump for heating, cooling (depending on device variant) and heated drinking water in a compact system. Optimally matched outdoor and indoor units with EHPA seal of approval as well as the heat pump KEYMARK, SG Ready certification and a top A++ ErP efficiency rating. ...
Split type air/water heat pump for heating, cooling (depending on device variant) and heated drinking water in a compact system. Optimally matched outdoor and indoor units with EHPA seal of approval as well as the heat pump KEYMARK, SG Ready certification and a top A++ ErP efficiency rating. Ideally suited to simple systems in new builds and modernisation projects. Easily apply for state grants for installing PV power systems for personal use with the SG Ready feature.
Features
- Can be used across wide outdoor temperature range down to -28 °C
- Simple design for monovalent or mono-energetic operation
- Flexibility with line lengths up to 75 m
- Low operating costs
- Increased convenience for hot water and cost-saving hot water preparation
- Simple system configuration/monitoring ...
- Can be used across wide outdoor temperature range down to -28 °C
- Simple design for monovalent or mono-energetic operation
- Flexibility with line lengths up to 75 m
- Low operating costs
- Increased convenience for hot water and cost-saving hot water preparation
- Simple system configuration/monitoring via SD card (included)
- Simple to set up and quick to install in the building’s plant/utility room
- Flexibility to adjust controls to different system requirements
- Increased comfort and better efficiency from having the optimum room temperature
Scope of delivery
- Power regulated compressor (inverter) with patented Zubadan technology.
- Flash Gas injection with HIC supercooling circuit and three electronic expansion valves as well as Power Receiver
- Integrated FTC5 heat pump controller
- External data interface
- SD memory card
- High-efficiency pump
- Electrical ...
- Power regulated compressor (inverter) with patented Zubadan technology.
- Flash Gas injection with HIC supercooling circuit and three electronic expansion valves as well as Power Receiver
- Integrated FTC5 heat pump controller
- External data interface
- SD memory card
- High-efficiency pump
- Electrical heating element
- Volumetric flow sensor
- Safety valves
- Manometer
- Bleeding device
- 200 litre heated drinking water reservoir (stainless steel)
- Heated drinking water reversing valve
- Plate heat
- Safety components and reservoir charging pump.
- 2 heating circuits, separately controlled (mixed and / or unmixed)
- Integrated of bivalent heat generator
Accessories / Replacement parts
-
Condensate drainage
-
Connection cable 10m
-
Connection cable 25m
-
ModBus-Adapter
-
Wi-Fi adapter
Technical data
Note:
- EER / COP values are calculated in accordance with EN14511.
- This value applies for average climatic conditions
- Energy efficiency scale from A+++ to D.
- 1 m free field measurement