Reciprocating piston

Danfoss outdoor unit Optyma Plus new G. OP-LP (H) QM074FHP00E 114X3253

Order No.: 104.2374
Manufacturer number: 114X3253
Manufacturer: Danfoss

Loading

One click to the most important information:

Description

Optyma™ Plus New Generation
Condensing units are often mounted on the external walls of buildings, in courtyards, on building facades or roofs. Optyma Plus™ New Generation can even be used in residential areas. The intelligent design of the compressor, noise insulation and fan speed ...

Optyma™ Plus New Generation
Condensing units are often mounted on the external walls of buildings, in courtyards, on building facades or roofs. Optyma Plus™ New Generation can even be used in residential areas. The intelligent design of the compressor, noise insulation and fan speed control means that the Optyma™ Plus condensing unit operates smoothly with very low noise emissions and without disturbing the local environment. The energy-saving components of the Optyma™ Plus New Generation, such as the microchannel heat exchanger, fan speed regulator and crankcase heating regulator, provide for significant reductions in energy consumption. You can massively reduce your energy consumption and costs. “Plug & Cool” condensing units in the Optyma™ Plus series stand out for their compact dimensions, low weight and simple wiring. This is why they are among the fastest and easiest to install and maintain. All parameters are pre-configured – you simply need to select a refrigerant. All condensing units come pre-assembled, piped, cabled and tested. Installation is extremely simple. The perfect refrigeration solution for food retailers, petrol station shops as well as cold and freezer storage rooms.

show more


Features

  • Compact dimensions
  • Connection box with IP54 protection rating
  • Stacking installation possible
  • Fully weatherproof
  • Microchannel heat exchanger
  • Monitoring and control

Scope of delivery

  • L'Unite compressor TFH 2511 Z solder 400V - Artikelnummer: 106.2445

Accessories / Replacement parts

  • Compressor end temperature sensor
    Danfoss universal sensor with cable AKS 21A Pt1000 2.5m -70/140 size with clamp
    Order No.: 231.0407
  • Crankcase heater
    Danfoss oil sump heater 230V 35W PTC f.MT/E/Z18-160, LT/E/Z22-10
    Order No.: 107.2603
  • Operating capacitor
    Danfoss operating capacitor for Optyma new 3.5MF for fan motor 75W 118U3297
    Order No.: 104.1986
  • Regulator / monitoring module
    Danfoss controller for Optyma Plus new generation 118U3465
    Order No.: 231.0963
  • Temperature sensor (intake side and surroundings)
    Danfoss temperature sensor with cable AKS 11 Pt1000 3,5m 084N0003
    Order No.: 231.0422
  • Ventilator motor
    Danfoss fan motor 230V 68W for Optyma new 118U3823
    Order No.: 104.1992

Technical data

Dimensions
Art der Aufstellung
Außenaufstellung
General information
Type
vollhermetisch
Refrigerant
R404A
 
R507A
 
R452A
Type
LPQM074FHP00E 400V
Condensation type
luftgekühlt
Electrical Data
Starting current (locked rotor)
28 A
Wiring diagram
WD5
Supply voltage
400/3/50 V/Ph/Hz
max. operating current
7,2 A
Weight
Brutto
94 kg
Weight net
89,00 kg
Performance data
Frequency controlled
Nein
Flow volume
12,92 m³/h
Displacement volume
74,25 cm³
Pipe connections
Liquid line
3/8 Inch
10,00 mm
Suction line
5/8 Inch
16,00 mm
Collector data
Collector volume
3,40 l
Sound data
Sound pressure level
38 dB(A)
in 10 m
Sound power level
69,0 dB(A)
Fan data
Diameter
450 mm
Power consumption
110 W
Air throughput
3300 m³/h
Number of fans
1 pcs
max. operating current
0,47 A total
Compressor data
Built-in compressor
TFH2511Z
Compressor type
Hubkolben
Volume
Oil charge
RL32HA

Noise emission measurements according to ISO 9614-1 and ISO 3744.

LBP according to EN 13215 @ -25 °C evaporating temp., +32 °C ambient temp., overheat 10 K

Condensing units can be operated with a minimum evaporating temperature of -45 °C.

Please consult the relevant software or information from Danfoss for further details.

Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.
Loading

Login now for complete access

To login