Panasonic air conditioner split chest GFE CS-E12GFEW 3.5KW
One click to the most important information:
Description
The mini chests are flexible solutions that ensure both a pleasant climate and comfortable atmosphere!
The chest can placed directly on the floor or attached the wall to free up some space. The unit can be recessed slightly or fully integrated into the wall. The performance of the mini chests ...
The mini chests are flexible solutions that ensure both a pleasant climate and comfortable atmosphere!
The chest can placed directly on the floor or attached the wall to free up some space. The unit can be recessed slightly or fully integrated into the wall. The performance of the mini chests for heating is particular good when outdoor temperatures reach a low -15 °C. To increase comfort and ensure optimal distribution of air around the room, cold air is blown out from the top of the unit and in heating mode warm air flows out via a low lying air outlet.
Features
- Even more energy efficient for low power costs
- Heating mode operates down to -15 °C
- Two outlet openings for increased comfort
- 24 hour real time clock with timer
- Turbo mode for quickly achieving the desired temperature
- Inverter controlled for optimum energy efficiency
- Environmentally friendly ...
- Even more energy efficient for low power costs
- Heating mode operates down to -15 °C
- Two outlet openings for increased comfort
- 24 hour real time clock with timer
- Turbo mode for quickly achieving the desired temperature
- Inverter controlled for optimum energy efficiency
- Environmentally friendly refrigerant R410A
- These devices can be used with existing R22 refrigerant pipes
Accessories / Replacement parts
-
Control via internet
Technical data
(Niedrig/Mittel/Hoch)
(Niedrig/Mittel/Hoch)
Notes
- The annual power consumption is based on the standards ErP Directive.
- Measurement positions: Indoor unit: 1 m in front of and 80 cm below the unit; outdoor unit: 1 m in front of the device at a height of 1.5 m. The measured values are based on EUROVENT document 6/C/006-97.
- 70 mm needs to be added to the dimensions for the pipe connection.