- Prodotti
- Materiale di montaggio
- Materiale isolante e protezione antincendio
- Tasche isolanti per valvola di espansione
- Borsa termica Euro f. Valvola di espansione T / TE2 / TI / TMV
Borsa termica Euro f. Valvola di espansione T / TE2 / TI / TMV
Di più in questa categoria: Tasche isolanti per valvola di espansione
Descrizione
Mounting of the TIA solder adapter: The stainless steel part of the solder adapter and the brass surface of the valve insert ensure optimum tightness. An additional copper gasket is not required for initial installation. However, the brass surface must not be scratched or damaged. However, an ...
Mounting of the TIA solder adapter: The stainless steel part of the solder adapter and the brass surface of the valve insert ensure optimum tightness. An additional copper gasket is not required for initial installation. However, the brass surface must not be scratched or damaged. However, an additional copper seal may be required after the union nut has been completely screwed on and off several times or if the brass surface is in poor condition. Correct torque for the union nut: - 40 to 45 Nm (without copper seal) - 40 to 50 Nm (with copper seal)