- Produkte
- Rivacold air cooler ceiling RS4380BED with heating
Rivacold air cooler ceiling RS4380BED with heating
One click to the most important information:
Description
The air-coolers in the RS series have been developed for installation in cold storage rooms for fresh and frozen products. Their extremely compact design allows them to be placed even in small cold stores.
The RS is available in two versions: High temperature version (3.5 / 7mm differentiated ...
The air-coolers in the RS series have been developed for installation in cold storage rooms for fresh and frozen products. Their extremely compact design allows them to be placed even in small cold stores.
The RS is available in two versions: High temperature version (3.5 / 7mm differentiated blade pitch) and medium and low temperature version (differentiated 4.5 / 9mm blade pitch).
The version with electric defrost heater is not provided in the high-temperature models; the defrost heater must be requested and delivered separately for these models. The medium and low temperature models are without defrost heating (model RS ... B) and with mounted and wired defrost heater (model RS ... BED) available. The heat exchanger has aluminium fins and 3/8” copper pipe and 25 x 22 geometry. Pressurized with nitrogen, up to 25 bar
The structural solutions guarantee robustness of the cladding and the absence of vibrations when in operation
Features
The fans used have the following properties:
- Produced according to EN 60335-1, with internal Motor protection
- Suction
- Plastic grille and steel angle bracket
- Diameter of fan 200 mm, inclined 34°
- Power supply 220-240/1/50-60Hz
- Protection rating IP42
- Operating temperature of -40 °C to +40 ...
The fans used have the following properties:
- Produced according to EN 60335-1, with internal Motor protection
- Suction
- Plastic grille and steel angle bracket
- Diameter of fan 200 mm, inclined 34°
- Power supply 220-240/1/50-60Hz
- Protection rating IP42
- Operating temperature of -40 °C to +40 °C
- Insulation class B
- Pressurized with nitrogen up to 25 bar
- Aluminium housing
- Screws, washers and nuts made of stainless steel
- Models B and BED are supplied with the drip tray installed
Accessories / Replacement parts
-
Mount for tubular heating elements
-
Outflow nozzles
-
Tubular heating elements
-
Ventilator blade
-
Ventilator motor
-
Ventilator protective grille